Whoop Juice Transfer Station - 1S Balance Charging Board
Candle Safety
1. Trim your wick before burning your candle the first time and every subsequent burn thereafter.
2. We advise burning your candle for periods of no longer than three hours at a time.
3. Discontinue burning your candle when there is 10mm / 1cm of wax is remaining.
4. Always burn your candle on a stable and heat resistant surface, away from drafts or items that can catch alight.
5. Never leave a burning candle unattended, near children or pets.
6. If you’re burning more than one candle at a time, space your candles approximately 100mm (10cm) apart.
Description What is it and what it do? Are you sick and tired of cheap 1S lipo chargers with limited functionally and often inaccurate calibration? Do you wish you could use your good 4/6S charger to balance charge/uncharge/storage or even check internal resistance? Well me too That’s why I developed this balance charging board that would allow doing just that! And unlike the dumb balance wire looms that only work when all of the plugs are used, I’ve added a jumper so that you don’t have to populate all 6 ports to close the balance circuit. Just place the jumper the number of lipos you want to charge and that will make it a 1 to 6S lipo to your charger! How is it made? With love of course �� But also with the most rigorous standard for safety and quality. The PCB board I designed from thick traces, copper filled on both sides for thermal dissipation The VIN and balance leads are assembled from 100mm, silicone wires, and genuine Amass XT60 It comes with extended, red jumpers (one extra as a spare in case your dog eats it) for easy swapping cell count And the final assembly and QC performed by yours truly, before getting packed by my lovely wife �� In other words, I’ve ironed down every detail with the help of valuable community feedback to bring you the best charging device for your whoop lipos It is not a hastily tossed together cash-grab. It is the result of several unsatisfactory iterations, samples and prototypes that I wouldn’t offer if I wasn’t 100% happy with. Don’t trust me? here’s proof �� But don’t take my word for it! Here’s what pilots think of it on my dealers websites! Over 3500 units sold! About the BT2.0 Version and other connector types: Preassembled BT2.0 is currently not an option anymore due to supply issues… All boards however come with unpopulated BT2.0 footprint so you can solder your own This means you may also solder on any other of your own connector to these unused pads! Add your own XT30, XT60, Pico 1.25, or hell even add another PH2 and make it a 6S 2P board so that you may charge up to 12 lipos at a time! Video Manual and Reviews: