Happymodel CrazyF411 AIO - 2-4S, 20A ESC, Serial ELRS
Candle Safety
1. Trim your wick before burning your candle the first time and every subsequent burn thereafter.
2. We advise burning your candle for periods of no longer than three hours at a time.
3. Discontinue burning your candle when there is 10mm / 1cm of wax is remaining.
4. Always burn your candle on a stable and heat resistant surface, away from drafts or items that can catch alight.
5. Never leave a burning candle unattended, near children or pets.
6. If you’re burning more than one candle at a time, space your candles approximately 100mm (10cm) apart.
Description Features A super robust, compact and feature packed AIO for 2-4S builds such as the X-bow 20A Bluejay ESC, plenty of headroom for a 3.5″ build Serial ELRS; none of that SPI rubbish Compact overall dimensions, perfect fit in a X-bow stack Motor plugs need to be unsoldered to fit in X-Bow; I’ll try to get them to come unsoldered next time Specifications: Flight controller MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: ICM42688P or BMI270 (SPI Control) Mount pattern: 25.5×25.5 M2 Size:32*28*9mm Power supply: 2-4S Lipo battery Built-in 20A Blheli_s ESC each Built-in Betaflight OSD(SPI Control) Built-in UART ExpressLRS 2.4GHz receiver Built-in 5V 1.5A BEC Flight controller firmware target: CRAZYBEEF4DX Onboard 4in1 ESC MCU upgraded to EFM8BB21 Power supply: 2-4S LiPo/LiPo HV (7v/17v) Currents: 20A continuous peak 25A (5 seconds) Support BLHeliSuite programmable Factory firmware: Bluejay 0.18.1Firmware target: F_H_40_48_v0.18.1 Default protocol: DSHOT150/DSHOT300/DSHOT600 Onboard UART ExpressLRS 2.4GHz Receiver Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz RF Frequency: 2.4GHzAntenna plug: IPEX Telemetry output Power: <12dBm Receiver protocol: CRSF Default firmware version: ExpressLRS V3.0.1 Firmware target:HappyModel EP1/2 2400 RX Onboard voltage and Amperage meters settings Voltage meter scale setting 110 Amperage meter scale setting 470 Includes: 1x CrazyF411 Flight controller 1x XT30 pigtail 1x 2.4G dipole antenna 4x Soft mounting grommets 4x Extra 180deg motor plugs Setup: More infos on binding and betaflight setup on Happymodel’s product page